STM32F072RB

STM32F072RB In Stock, Ready to Ship, Competitve Price

Brief Description:

The STM32F072x8/xB microcontrollers incorporate the high-performance ARM(R)Cortex(R)-M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 128…

Datasheet:

STM32F072RB Datasheet (PDF)

STMicroelectronics STM32F072RB

The STM32F072x8/xB microcontrollers incorporate the high-performance ARM(R)Cortex(R)-M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 128 Kbytes of Flash memory and 16 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I2Cs, two SPI/I2S, one HDMI CEC and four USARTs), one USB Full-speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer and an advanced-control PWM timer. The STM32F072x8/xB microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. The STM32F072x8/xB microcontrollers include devices in seven different packages ranging from 48 pins to 100 pins with a die form also available upon request. Depending on the device chosen, different sets of peripherals are included. These features make the STM32F072x8/xB microcontrollers suitable for a wide range of applications such as application control and user interfaces, hand-held equipment, A/V re

Features:

  • Core: ARM(R)32-bit Cortex(R)-M0 CPU, frequency up to 48 MHz
  • Memories 64 to 128 Kbytes of Flash memory
  • 16 Kbytes of SRAM with HW parity
  • CRC calculation unit
  • Reset and power management Digital and I/O supply: VDD= 2.0 V to 3.6 V
  • Analog supply: VDDA= VDDto 3.6 V
  • Selected I/Os: VDDIO2= 1.65 V to 3.6 V
  • Power-on/Power down reset (POR/PDR)
  • Programmable voltage detector (PVD)
  • Low power modes: Sleep, Stop, Standby
  • VBATsupply for RTC and backup registers
  • Clock management 4 to 32 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • Internal 8 MHz RC with x6 PLL option
  • Internal 40 kHz RC oscillator
  • Internal 48 MHz oscillator with automatic trimming based on ext. synchronization
  • Up to 87 fast I/Os All mappable on external interrupt vectors
  • Up to 68 I/Os with 5V tolerant capability and 19 with independent supply VDDIO2
  • Seven-channel DMA controller
  • One 12-bit, 1.0 μs ADC (up to 16 channels) Conversion range: 0 to 3.6 V
  • Separate analog supply: 2.4 V to 3.6 V
  • One 12-bit D/A converter (with 2 channels)
  • Two fast low-power analog comparators with programmable input and output
  • Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors
  • Calendar RTC with alarm and periodic wakeup from Stop/Standby
  • 12 timers One 16-bit advanced-control timer for six-channel PWM output
  • One 32-bit and seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding or DAC control
  • Independent and system watchdog timers
  • SysTick timer
  • Communication interfaces Two I2C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, one supporting SMBus/PMBus and wakeup
  • Four USARTs supporting master synchronous SPI and modem control, two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature
  • Two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, and with I2S interface multiplexed
  • CAN interface
  • USB 2.0 full-speed interface, able to run from internal 48 MHz oscillator and with BCD and LPM support
  • HDMI CEC wakeup on header reception
  • Serial wire debug (SWD)
  • 96-bit unique ID
  • All packages ECOPACK(R)2
  • Read more Read less
  • Circuit Diagram
  • Featured Videos
  • See All
  • Getting started with STM32 built-in USB DFU Bootloader
  • This video demonstrates how to use STMicroelectronics’ built-in STM32 USB bootloader to program or upgrade the device firmware.
  • Watch the video (5:22)

Parametrics:

  • Flash:128 Kbytes
  • SRAM:16 Kbytes
  • Max CPU Frequency:48 MHz
  • Operating Voltage:2.0 – 3.6 V
  • I/Os:87 (up to)
  • Temperature Range:-40 to +85 C
Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: Microcontrollers – MCU
Series: STM32F072RB
Core: Arm Cortex
Flash Memory Size: 128 Kbytes
Data RAM Size: 16 Kbytes
Max CPU Frequency: 48 MHz
Operating Supply Voltage: 2.0 – 3.6 V
ADC Resolution: –
Number of I/Os: 87 (up to)
Operating Temperature: -40 to +85 C
Brand: STMicroelectronics

In-Stock Part, Ready to Ship, Competitve Price, RFQ please contact: sales@icharbor.com