STM32MP157C

STM32MP157C In Stock, Ready to Ship, Competitve Price

Brief Description:

The STM32MP157C/F devices are based on the high-performance dual-core Arm(R) Cortex(R)-A7 32-bit RISC core operating at up to 800 MHz.

Datasheet:

STM32MP157C Datasheet (PDF)

STMicroelectronics STM32MP157C

The STM32MP157C/F devices are based on the high-performance dual-core Arm(R) Cortex(R)-A7 32-bit RISC core operating at up to 800 MHz. The Cortex-A7 processor includes a 32-Kbyte L1 instruction cache for each CPU, a 32-Kbyte L1 data cache for each CPU and a 256-Kbyte level2 cache. The Cortex-A7 processor is a very energy-efficient application processor designed to provide rich performance in high-end wearables, and other low-power embedded and consumer applications. It provides up to 20% more single thread performance than the Cortex-A5 and provides similar performance than the Cortex-A9. The Cortex-A7 incorporates all features of the high-performance Cortex-A15 and Cortex-A17 processors, including virtualization support in hardware, NEON(TM), and 128-bit AMBA(R)4 AXI bus interface. The STM32MP157C/F devices also embed a Cortex(R) -M4 32-bit RISC core operating at up to 209 MHz frequency. Cortex-M4 core features a floating point unit (FPU) single precision which supports Arm(R) single-precision data-processing instructions and data types. The Cortex(R) -M4 supports a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32MP157C

Features:

  • Includes ST state-of-the-art patented technology
  • Core 32-bit dual-core Arm(R) Cortex(R)-A7 L1 32-Kbyte I / 32-Kbyte D for each core
  • 256-Kbyte unified level 2 cache
  • Arm(R) NEON(TM) and Arm(R) TrustZone(R)
  • 32-bit Arm(R) Cortex(R)-M4 with FPU/MPU Up to 209 MHz (Up to 703 CoreMark(R))
  • Memories External DDR memory up to 1 Gbyte up to LPDDR2/LPDDR3-1066 16/32-bit
  • up to DDR3/DDR3L-1066 16/32-bit
  • 708 Kbytes of internal SRAM: 256 Kbytes of AXI SYSRAM + 384 Kbytes of AHB SRAM + 64 Kbytes of AHB SRAM in Backup domain and 4 Kbytes of SRAM in Backup domain
  • Dual mode Quad-SPI memory interface
  • Flexible external memory controller with up to 16-bit data bus: parallel interface to connect external ICs and SLC NAND memories with up to 8-bit ECC
  • Security/safety Secure boot, TrustZone(R) peripherals, active tamper
  • Cortex(R)-M4 resources isolation
  • Reset and power management 1.71 V to 3.6 V I/Os supply (5 V-tolerant I/Os)
  • POR, PDR, PVD and BOR
  • On-chip LDOs (RETRAM, BKPSRAM, DSI 1.2 V, USB 1.8 V, 1.1 V)
  • Backup regulator (~0.9 V)
  • Internal temperature sensors
  • Low-power modes: Sleep, Stop and Standby
  • DDR memory retention in Standby mode
  • Controls for PMIC companion chip
  • Low-power consumption Total current consumption down to 2 µA (Standby mode, no RTC, no LSE, no BKPSRAM, no RETRAM)
  • Clock management Internal oscillators: 64 MHz HSI oscillator, 4 MHz CSI oscillator, 32 kHz LSI oscillator
  • External oscillators: 8-48 MHz HSE oscillator, 32.768 kHz LSE oscillator
  • 6 × PLLs with fractional mode
  • General-purpose input/outputs Up to 176 I/O ports with interrupt capability Up to 8 secure I/Os
  • Up to 6 Wakeup, 3 tampers, 1 active tamper
  • Interconnect matrix 2 bus matrices 64-bit Arm(R) AMBA(R) AXI interconnect, up to 266 MHz
  • 32-bit Arm(R) AMBA(R) AHB interconnect, up to 209 MHz
  • 3 DMA controllers to unload the CPU 48 physical channels in total
  • 1 × high-speed general-purpose master direct memory access controller (MDMA)
  • 2 × dual-port DMAs with FIFO and request router capabilities for optimal peripheral management
  • Up to 37 communication peripherals 6 × I2C FM+ (1 Mbit/s, SMBus/PMBus)
  • 4 × UART + 4 × USART (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, SPI)
  • 6 × SPI (50 Mbit/s, including 3 with full duplex I2S audio class accuracy via internal audio PLL or external clock)(+ 4 with USART)
  • 4 × SAI (stereo audio: I2S, PDM, SPDIF Tx)
  • SPDIF Rx with 4 inputs
  • HDMI-CEC interface
  • MDIO Slave interface
  • 3 × SDMMC up to 8-bit (SD / e•MMC(TM)/ SDIO)
  • 2 × CAN controllers supporting CAN FD protocol, out of which one supports time-triggered CAN (TTCAN)
  • 2 × USB 2.0 high-speed Host+ 1 × USB 2.0 full-speed OTG simultaneously or 1 × USB 2.0 high-speed Host+ 1 × USB 2.0 high-speed OTG simultaneously
  • 10/100M or Gigabit Ethernet GMAC IEEE 1588v2 hardware, MII/RMII/GMII/RGMII
  • 8- to 14-bit camera interface up to 140 Mbyte/s
  • 6 analog peripherals 2 × ADCs with 16-bit max. resolution (12 bits up to 4.5 Msps, 14 bits up to 4 Msps, 16 bits up to 3.6 Msps)
  • 1 × temperature sensor

Parametrics:

  • Core:Arm Cortex-A7
  • Max CPU Frequency:209 MHz
  • I/Os:176 (up to)
Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: Microcontrollers – MCU
Series: STM32MP157C
Core: Arm Cortex-A7
Flash Memory Size: –
Data RAM Size: –
Max CPU Frequency: 209 MHz
Operating Supply Voltage: –
ADC Resolution: –
Number of I/Os: 176 (up to)
Operating Temperature: –
Brand: STMicroelectronics

In-Stock Part, Ready to Ship, Competitve Price, RFQ please contact: sales@icharbor.com