
STM32F303C8 In Stock, Ready to Ship, Competitve Price
Brief Description:
The STM32F303x6/8 family incorporates the high-performance Arm(R) Cortex(R)-M4 32-bit RISC core operating at up to 72 MHz frequency embedding a floating point unit (FPU), high-speed…
Datasheet:
STMicroelectronics STM32F303C8
The STM32F303x6/8 family incorporates the high-performance Arm(R) Cortex(R)-M4 32-bit RISC core operating at up to 72 MHz frequency embedding a floating point unit (FPU), high-speed embedded memories (up to 64 Kbytes of Flash memory, 12 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The STM32F303x6/8 microcontrollers offer up to two fast 12-bit ADCs (5 Msps), up to three ultra-fast comparators, an operational amplifier, three DAC channels, a low-power RTC, one general-purpose 32-bit timer, one timer dedicated to motor control, and four general-purpose 16-bit timers. They also feature standard and advanced communication interfaces: one I2C, one SPI, up to three USARTs and one CAN. The STM32F303x6/8 family operates in the –40 to +85 °C and –40 to +105 °C temperature ranges from 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allow the design of low-power applications. The STM32F303x6/8 family offers devices in 32 and 64-pin packages. Depending on the device chosen, different sets of peripherals are included.
Features:
- Core: Arm(R) Cortex(R)-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction
- Memories Up to 64 Kbytes of Flash memory
- 12 Kbytes of SRAM with HW parity check
- Routine booster: 4 Kbytes of SRAM on instruction and data bus with HW parity check (CCM)
- CRC calculation unit
- Reset and supply management Low-power modes: Sleep, Stop, Standby
- VDD,VDDA voltage range: 2.0 to 3.6 V
- Power-on/Power-down reset (POR/PDR)
- Programmable voltage detector (PVD)
- VBAT supply for RTC and backup registers
- Clock management 4 to 32 MHz crystal oscillator
- 32 kHz oscillator for RTC with calibration
- Internal 8 MHz RC (up to 64 MHz with PLL option)
- Internal 40 kHz oscillator
- Up to 51 fast I/O ports, all mappable on external interrupt vectors, several 5 V-tolerant
- Interconnect matrix
- 7-channel DMA controller
- Up to two ADC 0.20 μs (up to 21 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single-ended / differential mode, separate analog supply from 2.0 to 3.6 V
- Temperature sensor
- Up to three 12-bit DAC channels with analog supply from 2.4 V to 3.6 V
- Three ultra-fast rail-to-rail analog comparators with analog supply from 2 to 3.6 V
- One operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V
- Up to 18 capacitive sensing channels supporting touchkeys, linear and rotary touch sensors
- Up to 11 timers One 32-bit timer and one 16-bit timer with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- One 16-bit 6-channel advanced-control timer, with up to 6 PWM channels, deadtime generation and emergency stop
- One 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime generation, emergency stop
- Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop
- Two watchdog timers (independent, window)
- SysTick timer: 24-bit downcounter
- Up to two 16-bit basic timers to drive DAC
- Calendar RTC with alarm, periodic wakeup from Stop
- Communication interfaces CAN interface (2.0 B Active) and one SPI
- One I2C with 20 mA current sink to support Fast mode plus, SMBus/PMBus
- Up to 3 USARTs, one with ISO/IEC 7816 interface, LIN, IrDA, modem control
- Debug mode: serial wire debug (SWD), JTAG
- 96-bit unique ID
- All packages ECOPACK(R)2 compliant
- Read more Read less
- Circuit Diagram
- jQuery.get(“\/content\/st_com_cx\/en\/products\/microcontrollers-microprocessors\/stm32-32-bit-arm-cortex-mcus\/stm32-mixed-signal-mcus\/stm32f3-series\/stm32f303\/stm32f303c8\/_jcr_content\/recommended-tools-software.nocache.html\/st-site-cx\/components\/containers\/product\/recommended-tools-software.html”,
- function(data) {
- jQuery(“#dynamic_include_filter_div_166126”).replaceWith(data);
- Your browser does not support JavaScript. Some components may not be visible.
- jQuery.get(“\/content\/st_com_cx\/en\/products\/microcontrollers-microprocessors\/stm32-32-bit-arm-cortex-mcus\/stm32-mixed-signal-mcus\/stm32f3-series\/stm32f303\/stm32f303c8\/_jcr_content\/tools-software.nocache.html\/st-site-cx\/components\/containers\/product\/tools-software.html”,
- jQuery(“#dynamic_include_filter_div_166127”).replaceWith(data);
Parametrics:
- Flash:64 Kbytes
- SRAM:12 Kbytes
- Max CPU Frequency:72 MHz
- Operating Voltage:2.0 – 3.6 V
- I/Os:51 (up to)
- Temperature Range:-40 to +85 C
| Product Attribute | Attribute Value |
|---|---|
| Manufacturer: | STMicroelectronics |
| Product Category: | Microcontrollers – MCU |
| Series: | STM32F303C |
| Core: | Arm Cortex |
| Flash Memory Size: | 64 Kbytes |
| Data RAM Size: | 12 Kbytes |
| Max CPU Frequency: | 72 MHz |
| Operating Supply Voltage: | 2.0 – 3.6 V |
| ADC Resolution: | – |
| Number of I/Os: | 51 (up to) |
| Operating Temperature: | -40 to +85 C |
| Brand: | STMicroelectronics |
In-Stock Part, Ready to Ship, Competitve Price, RFQ please contact: sales@icharbor.com
