STM32F303RE

STM32F303RE In Stock, Ready to Ship, Competitve Price

Brief Description:

The STM32F303xD/E family is based on the high-performance ARM(R)Cortex(R)-M4 32-bit RISC core with FPU operating at a frequency of 72 MHz, and embedding a floating point unit (FPU), a…

Datasheet:

STM32F303RE Datasheet (PDF)

STMicroelectronics STM32F303RE

The STM32F303xD/E family is based on the high-performance ARM(R)Cortex(R)-M4 32-bit RISC core with FPU operating at a frequency of 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (512-Kbyte Flash memory, 80-Kbyte SRAM), a flexible memory controller (FSMC) for static memories (SRAM, PSRAM, NOR and NAND), and an extensive range of enhanced I/Os and peripherals connected to an AHB and two APB buses. The devices offer four fast 12-bit ADCs (5 Msps), seven comparators, four operational amplifiers, two DAC channels, a low-power RTC, up to five general-purpose 16-bit timers, one general-purpose 32-bit timer, and up,to three timers dedicated to motor control. They also feature standard and advanced communication interfaces: up to three I2Cs, up to four SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL. The STM32F303xD/E family operates in the -40 to +85°C and -40 to +105°C temperature ranges from a 2.0 to 3.6 V power supply. A comp

Features:

  • Core: ARM(R)Cortex(R)-M4 32-bit CPU with 72 MHz FPU, single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit)
  • Operating conditions: VDD, VDDAvoltage range: 2.0 V to 3.6 V
  • Memories Up to 512 Kbytes of Flash memory
  • 64 Kbytes of SRAM, with HW parity check implemented on the first 32 Kbytes.
  • Routine booster: 16 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM)
  • Flexible memory controller (FSMC) for static memories, with four Chip Select
  • CRC calculation unit
  • Reset and supply management Power-on/Power-down reset (POR/PDR)
  • Programmable voltage detector (PVD)
  • Low-power modes: Sleep, Stop and Standby
  • VBATsupply for RTC and backup registers
  • Clock management 4 to 32 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • Internal 8 MHz RC with x 16 PLL option
  • Internal 40 kHz oscillator
  • Up to 115 fast I/Os All mappable on external interrupt vectors
  • Several 5 V-tolerant
  • Interconnect matrix
  • 12-channel DMA controller
  • Four ADCs 0.20 μs (up to 40 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 2.0 to 3.6 V
  • Two 12-bit DAC channels with analog supply from 2.4 to 3.6 V
  • Seven ultra-fast rail-to-rail analog comparators with analog supply from 2.0 to 3.6 V
  • Four operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V
  • Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
  • Up to 14 timers: One 32-bit timer and two 16-bit timers with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
  • Three 16-bit 6-channel advanced-control timers, with up to six PWM channels, deadtime generation and emergency stop
  • One 16-bit timer with two IC/OCs, one OCN/PWM, deadtime generation and emergency stop
  • Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop
  • Two watchdog timers (independent, window)
  • One SysTick timer: 24-bit downcounter
  • Two 16-bit basic timers to drive the DAC
  • Calendar RTC with Alarm, periodic wakeup from Stop/Standby
  • Communication interfaces CAN interface (2.0B Active)
  • Three I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from STOP
  • Up to five USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control)
  • Up to four SPIs, 4 to 16 programmable bit frames, two with multiplexed half/full duplex I2S interface
  • USB 2.0 full-speed interface with LPM support
  • Infrared transmitter
  • SWD, Cortex(R)-M4 with FPU ETM, JTAG
  • 96-bit unique ID
  • Read more Read less
  • Circuit Diagram
  • Recommended for you
  • Related Applications
  • Industrial

Parametrics:

  • Flash:512 Kbytes
  • SRAM:64 Kbytes
  • Operating Voltage:2.0 – 3.6 V
  • I/Os:115 (up to)
  • Temperature Range:-40 to +85 C
Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: Microcontrollers – MCU
Series: STM32F303RE
Core: Arm Cortex
Flash Memory Size: 512 Kbytes
Data RAM Size: 64 Kbytes
Max CPU Frequency: –
Operating Supply Voltage: 2.0 – 3.6 V
ADC Resolution: –
Number of I/Os: 115 (up to)
Operating Temperature: -40 to +85 C
Brand: STMicroelectronics

In-Stock Part, Ready to Ship, Competitve Price, RFQ please contact: sales@icharbor.com