
STM32F411RE In Stock, Ready to Ship, Competitve Price
Brief Description:
The STM32F411xC/xE devices are based on the high-performance Arm(R) Cortex(R) -M4 32-bit RISC core operating at a frequency of up to 100 MHz.
Datasheet:
STMicroelectronics STM32F411RE
The STM32F411xC/xE devices are based on the high-performance Arm(R) Cortex(R) -M4 32-bit RISC core operating at a frequency of up to 100 MHz. The Cortex(R)-M4 core features a floating-point unit (FPU) single precision, which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU), which enhances application security. The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching. The STM32F411xC/xE incorporate high-speed embedded memories (up to 512 Kbytes of flash memory, 128 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB bus and a 32-bit multi-AHB bus matrix. All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.
Features:
- Includes ST state-of-the-art patented technology
- Dynamic efficiency line with BAM (Batch acquisition mode) 1.7 V to 3.6 V power supply
- – 40°C to 85/105/125 °C temperature range
- Core: Arm(R) 32-bit Cortex(R)-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Memories Up to 512 Kbytes of flash memory
- 128 Kbytes of SRAM
- Clock, reset, and supply management 1.7 V to 3.6 V application supply and I/Os
- POR, PDR, PVD, and BOR
- 4-to-26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Power consumption Run: 100 µA/MHz (peripheral off)
- Stop (Flash in Stop mode, fast wakeup time): 42 µA typical at 25 °C; 65 µA max at 25 °C
- Stop (Flash in Deep power down mode, slow wakeup time): down to 9 µA at 25 °C; 28 µA max at 25 °C
- Standby: 1.8 µA at 25 °C / 1.7 V without RTC; 11 µA at 85 °C at 1.7 V
- VBAT supply for RTC: 1 µA at 25 °C
- 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels
- General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
- Up to 11 timers: up to six 16-bit, two 32-bit timers up to 100 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer
- Debug mode Serial wire debug (SWD) & JTAG interfaces
- CortexÒ-M4 Embedded Trace Macrocell(TM)
- Up to 81 I/O ports with interrupt capability Up to 78 fast I/Os up to 100 MHz
- Up to 77 5 V-tolerant I/Os
- Up to 13 communication interfaces Up to 3 x I2C interfaces (SMBus/PMBus)
- Up to 3 USARTs (2 x 12.5 Mbit/s, 1 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
- Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI, or I2S audio protocol), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
- SDIO interface (SD/MMC/eMMC)
- Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY
- CRC calculation unit
- 96-bit unique ID
- RTC: subsecond accuracy, hardware calendar
- All packages are ECOPACK2 compliant
- Read more Read less
- Circuit Diagram
- More from the product line
- jQuery.get(“\/content\/st_com_cx\/en\/products\/microcontrollers-microprocessors\/stm32-32-bit-arm-cortex-mcus\/stm32-high-performance-mcus\/stm32f4-series\/stm32f411\/stm32f411re\/_jcr_content\/recommended-tools-software.nocache.html\/st-site-cx\/components\/containers\/product\/recommended-tools-software.html”,
- function(data) {
- jQuery(“#dynamic_include_filter_div_217697”).replaceWith(data);
- Your browser does not support JavaScript. Some components may not be visible.
- jQuery.get(“\/content\/st_com_cx\/en\/products\/microcontrollers-microprocessors\/stm32-32-bit-arm-cortex-mcus\/stm32-high-performance-mcus\/stm32f4-series\/stm32f411\/stm32f411re\/_jcr_content\/tools-software.nocache.html\/st-site-cx\/components\/containers\/product\/tools-software.html”,
- jQuery(“#dynamic_include_filter_div_217699”).replaceWith(data);
- jQuery.get(“\/content\/st_com_cx\/en\/products\/microcontrollers-microprocessors\/stm32-32-bit-arm-cortex-mcus\/stm32-high-performance-mcus\/stm32f4-series\/stm32f411\/stm32f411re\/_jcr_content\/ts-design-resources.nocache.html\/st-site-cx\/components\/containers\/product\/design-resources\/tools-software.html”,
- jQuery(“#dynamic_include_filter_div_217700”).replaceWith(data);
- <!– Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law
Parametrics:
- Flash:512 Kbytes
- SRAM:128 Kbytes
- I/Os:81 (up to)
| Product Attribute | Attribute Value |
|---|---|
| Manufacturer: | STMicroelectronics |
| Product Category: | Microcontrollers – MCU |
| Series: | STM32F411RE |
| Core: | Arm Cortex |
| Flash Memory Size: | 512 Kbytes |
| Data RAM Size: | 128 Kbytes |
| Max CPU Frequency: | – |
| Operating Supply Voltage: | – |
| ADC Resolution: | – |
| Number of I/Os: | 81 (up to) |
| Operating Temperature: | – |
| Brand: | STMicroelectronics |
In-Stock Part, Ready to Ship, Competitve Price, RFQ please contact: sales@icharbor.com
