STM32H743ZI

STM32H743ZI In Stock, Ready to Ship, Competitve Price

Brief Description:

STM32H742xI/G and STM32H743xI/G devices are based on the high-performance Arm(R) Cortex(R)-M7 32-bit RISC core operating at up to 480 MHz.

Datasheet:

STM32H743ZI Datasheet (PDF)

STMicroelectronics STM32H743ZI

STM32H742xI/G and STM32H743xI/G devices are based on the high-performance Arm(R) Cortex(R)-M7 32-bit RISC core operating at up to 480 MHz. The Cortex(R) -M7 core features a floating point unit (FPU) which supports Arm(R) double-precision (IEEE 754 compliant) and single-precision data-processing instructions and data types. STM32H742xI/G and STM32H743xI/G devices support a full set of DSP instructions and a memory protection unit (MPU) to enhance application security. STM32H742xI/G and STM32H743xI/G devices incorporate high-speed embedded memories with a dual-bank flash memory of up to 2 Mbytes, up to 1 Mbyte of RAM (including 192 Kbytes of TCM RAM, up to 864 Kbytes of user SRAM and 4 Kbytes of backup SRAM), as well as an extensive range of enhanced I/Os and peripherals connected to APB buses, AHB buses, 2×32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memory access. All the devices offer three ADCs, two DACs, two ultra-low power comparators, a low-power RTC, a high-resolution timer, 12 general-purpose 16-bit timers, two PWM timers for motor control, five low-power timers, a true random number generator (RNG). The devices support four

Features:

  • Includes ST state-of-the-art patented technology
  • Core 32-bit Arm(R) Cortex(R)-M7 core with double-precision FPU and L1 cache: 16 Kbytes of data and 16 Kbytes of instruction cache; frequency up to 480 MHz, MPU, 1027 DMIPS/ 2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Memories Up to 2 Mbytes of flash memory with read-while-write support
  • Up to 1 Mbyte of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM + 128 Kbytes of DTCM RAM for time critical routines), Up to 864 Kbytes of user SRAM, and 4 Kbytes of SRAM in Backup domain
  • Dual mode Quad-SPI memory interface running up to 133 MHz
  • Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND flash memory clocked up to 100 MHz in Synchronous mode
  • CRC calculation unit
  • Security ROP, PC-ROP, active tamper
  • General-purpose input/outputs Up to 168 I/O ports with interrupt capability
  • Reset and power management 3 separate power domains which can be independently clock-gated or switched off: D1: high-performance capabilities
  • D2: communication peripherals and timers
  • D3: reset/clock control/power management
  • 1.62 to 3.6 V application supply and I/Os
  • POR, PDR, PVD and BOR
  • Dedicated USB power embedding a 3.3 V internal regulator to supply the internal PHYs
  • Embedded regulator (LDO) with configurable scalable output to supply the digital circuitry
  • Voltage scaling in Run and Stop mode (6 configurable ranges)
  • Backup regulator (~0.9 V)
  • Voltage reference for analog peripheral/VREF+
  • Low-power modes: Sleep, Stop, Standby and VBAT supporting battery charging
  • Low-power consumption VBAT battery operating mode with charging capability
  • CPU and domain power state monitoring pins
  • 2.95 µA in Standby mode (Backup SRAM OFF, RTC/LSE ON)
  • Clock management Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI
  • External oscillators: 4-48 MHz HSE, 32.768 kHz LSE
  • 3× PLLs (1 for the system clock, 2 for kernel clocks) with Fractional mode
  • Interconnect matrix 3 bus matrices (1 AXI and 2 AHB)
  • Bridges (5× AHB2-APB, 2× AXI2-AHB)
  • 4 DMA controllers to unload the CPU 1× high-speed master direct memory access controller (MDMA) with linked list support
  • 2× dual-port DMAs with FIFO
  • 1× basic DMA with request router capabilities
  • Up to 35 communication peripherals 4× I2Cs FM+ interfaces (SMBus/PMBus)
  • 4× USARTs/4x UARTs/1LPUART (ISO7816 interface, LIN, IrDA, up to 12.5 Mbit/s)
  • 6 SPI (+1 with Quad-SPI + 4 with USART): 3 with muxed duplex I2S audio class accuracy via internal audio PLL or external clock, 1× I2S in LP domain (up to 150 MHz) and up to 4 additional SPI from 4 USART/UART when configured in synchronous mode.
  • SPDIFRX interface
  • SWPMI single-wire protocol master I/F
  • MDIO Slave interface
  • 2× SD/SDIO/MMC interfaces (up to 125 MHz)
  • 2× CAN controllers: 2 with CAN FD, 1 with time-triggered CAN (TT-CAN)
  • 2× USB OTG interfaces (1FS, 1HS/FS) crystal-less solution with LPM and BCD
  • Ethernet MAC interface with DMA controller
  • HDMI-CEC
  • 8- to 14-bit camera interface (up to 80 MHz)
  • 11 analog peripherals 3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)
  • 1× temperature sensor

Parametrics:

  • Flash:2 Mbytes
  • SRAM:1 Mbyte
  • Operating Voltage:1.62 – 3.6 V
  • I/Os:168 (up to)
Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: Microcontrollers – MCU
Series: STM32H743ZI
Core: Arm Cortex
Flash Memory Size: 2 Mbytes
Data RAM Size: 1 Mbyte
Max CPU Frequency: –
Operating Supply Voltage: 1.62 – 3.6 V
ADC Resolution: –
Number of I/Os: 168 (up to)
Operating Temperature: –
Brand: STMicroelectronics

In-Stock Part, Ready to Ship, Competitve Price, RFQ please contact: sales@icharbor.com