STM32L476RG

STM32L476RG In Stock, Ready to Ship, Competitve Price

Brief Description:

The STM32L476xx devices are ultra-low-power microcontrollers based on the high-performance Arm(R) Cortex(R)-M4 32-bit RISC core operating at a frequency of up to 80 MHz.

Datasheet:

STM32L476RG Datasheet (PDF)

STMicroelectronics STM32L476RG

The STM32L476xx devices are ultra-low-power microcontrollers based on the high-performance Arm(R) Cortex(R)-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision that supports all Arm(R) single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32L476xx devices embed high-speed memories (flash memory up to 1 Mbyte, up to 128 Kbyte of SRAM), a flexible external memory controller (FSMC) for static memories (for devices with packages of 100 pins and more), a Quad SPI flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix. The STM32L476xx devices embed several protection mechanisms for embedded flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall. The devices offer up to three fast 12-bit ADCs (5 Msps), two comparators, two operational amplifiers, two DAC channels, an internal voltage referen

Features:

  • Includes ST state-of-the-art patented technology Ultra-low-power with FlexPowerControl 1.71 V to 3.6 V power supply
  • -40 °C to 85/105/125 °C temperature range
  • 300 nA in VBAT mode: supply for RTC and 32×32-bit backup registers
  • 30 nA Shutdown mode (5 wakeup pins)
  • 120 nA Standby mode (5 wakeup pins)
  • 420 nA Standby mode with RTC
  • 1.1 µA Stop 2 mode, 1.4 µA with RTC
  • 100 µA/MHz run mode (LDO Mode)
  • 39 μA/MHz run mode (@3.3 V SMPS Mode)
  • Batch acquisition mode (BAM)
  • 4 µs wakeup from Stop mode
  • Brown out reset (BOR)
  • Interconnect matrix
  • Core: Arm(R) 32-bit Cortex(R)-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator(TM)) allowing 0-wait-state execution from flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions
  • Performance benchmark 1.25 DMIPS/MHz (Drystone 2.1)
  • 273.55 CoreMark(R) (3.42 CoreMark/MHz @ 80 MHz)
  • Energy benchmark 294 ULPMark(TM) CP score
  • 106 ULPMark(TM) PP score
  • Clock Sources 4 to 48 MHz crystal oscillator
  • 32 kHz crystal oscillator for RTC (LSE)
  • Internal 16 MHz factory-trimmed RC (±1%)
  • Internal low-power 32 kHz RC (±5%)
  • Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy)
  • 3 PLLs for system clock, USB, audio, ADC
  • Up to 114 fast I/Os, most 5 V-tolerant, up to 14 I/Os with independent supply down to 1.08 V
  • RTC with HW calendar, alarms and calibration
  • LCD 8× 40 or 4× 44 with step-up converter
  • Up to 24 capacitive sensing channels: support touchkey, linear and rotary touch sensors
  • 16x timers: 2x 16-bit advanced motor-control, 2x 32-bit and 5x 16-bit general purpose, 2x 16-bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer
  • Memories Up to 1 MB flash, 2 banks read-while-write, proprietary code readout protection
  • Up to 128 KB of SRAM including 32 KB with hardware parity check
  • External memory interface for static memories supporting SRAM, PSRAM, NOR and NAND memories
  • Quad SPI memory interface
  • 4x digital filters for sigma delta modulator
  • Rich analog peripherals (independent supply) 3x 12-bit ADC 5 Msps, up to 16-bit with hardware oversampling, 200 µA/Msps
  • 2x 12-bit DAC output channels, low-power sample and hold
  • 2x operational amplifiers with built-in PGA
  • 2x ultra-low-power comparators
  • 20x communication interfaces USB OTG 2.0 full-speed, LPM and BCD
  • 2x SAIs (serial audio interface)
  • 3x I2C FM+(1 Mbit/s), SMBus/PMBus
  • 5x USARTs (ISO 7816, LIN, IrDA, modem)
  • 1x LPUART (Stop 2 wake-up)
  • 3x SPIs (and 1x Quad SPI)
  • CAN (2.0B Active) and SDMMC interface

Parametrics:

  • Core:Arm Cortex-M4
  • SRAM:128 KB
  • I/Os:114 (up to)
Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: Microcontrollers – MCU
Series: STM32L476RG
Core: Arm Cortex-M4
Flash Memory Size: –
Data RAM Size: 128 KB
Max CPU Frequency: –
Operating Supply Voltage: –
ADC Resolution: –
Number of I/Os: 114 (up to)
Operating Temperature: –
Brand: STMicroelectronics

In-Stock Part, Ready to Ship, Competitve Price, RFQ please contact: sales@icharbor.com