STM32WB55RG

STM32WB55RG In Stock, Ready to Ship, Competitve Price

Brief Description:

The STM32WB55xx and STM32WB35xx multiprotocol wireless and ultra-low-power devices embed a powerful and ultra-low-power radio compliant with the Bluetooth(R) Low Energy SIG specification…

Datasheet:

STM32WB55RG Datasheet (PDF)

STMicroelectronics STM32WB55RG

The STM32WB55xx and STM32WB35xx multiprotocol wireless and ultra-low-power devices embed a powerful and ultra-low-power radio compliant with the Bluetooth(R) Low Energy SIG specification 5.4 and with IEEE 802.15.4-2011. They contain a dedicated Arm(R) Cortex(R)-M0+ for performing all the real-time low layer operation. The devices are designed to be extremely low-power and are based on the high-performance Arm(R) Cortex(R)-M4 32-bit RISC core operating at a frequency of up to 64 MHz. This core features a Floating point unit (FPU) single precision that supports all Arm(R)single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) that enhances application security. Enhanced inter-processor communication is provided by the IPCC with six bidirectional channels. The HSEM provides hardware semaphores used to share common resources between the two processors. The devices embed high-speed memories (up to 1 Mbyte of flash memory for STM32WB55xx, up to 512 Kbytes for STM32WB35xx, up to 256 Kbytes of SRAM for STM32WB55xx, 96 Kbytes for STM32WB35xx), a Quad-SPI flash memory interface (available on all packag

Features:

  • Include ST state-of-the-art patented technology
  • Radio 2.4 GHz
  • RF transceiver supporting Bluetooth(R) 5.4 specification, IEEE 802.15.4-2011 PHY and MAC, supporting Thread 1.3 and Zigbee(R) 3.0
  • RX sensitivity: -96 dBm (Bluetooth(R) Low Energy at 1 Mbps), -100 dBm (802.15.4)
  • Programmable output power up to +6 dBm with 1 dB steps
  • Integrated balun to reduce BOM
  • Support for 2 Mbps
  • Support GATT caching
  • Support EATT (enhanced ATT)
  • Support advertising extension
  • Dedicated Arm(R) 32-bit Cortex(R) M0+ CPU for real-time Radio layer
  • Accurate RSSI to enable power control
  • Suitable for systems requiring compliance with radio frequency regulations ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15 and ARIB STD-T66
  • Support for external PA
  • Available integrated passive device (IPD) companion chip for optimized matching solution (MLPF-WB-01E3, or MLPF-WB55-02E3, or MLPF-WB-02D3)
  • Ultra-low-power platform 1.71 to 3.6 V power supply
  • – 40 °C to 85 / 105 °C temperature ranges
  • 13 nA shutdown mode
  • 600 nA Standby mode + RTC + 32 KB RAM
  • 2.1 µA Stop mode + RTC + 256 KB RAM
  • Active-mode MCU: < 53 µA / MHz when RF and SMPS on
  • Radio: Rx 4.5 mA / Tx at 0 dBm 5.2 mA
  • Core: Arm(R) 32-bit Cortex(R)-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from flash memory, frequency up to 64 MHz, MPU, 80 DMIPS, and DSP instructions
  • Performance benchmark 1.25 DMIPS/MHz (Drystone 2.1)
  • 219.48 CoreMark(R) (3.43 CoreMark/MHz at 64 MHz)
  • Energy benckmark 303 ULPMark(TM) CP score
  • Supply and reset management High efficiency embedded SMPS step-down converter with intelligent bypass mode
  • Ultra-safe, low-power BOR (brownout reset) with five selectable thresholds
  • Ultra-low-power POR/PDR
  • Programmable voltage detector (PVD)
  • VBAT mode with RTC and backup registers
  • Clock sources 32 MHz crystal oscillator with integrated trimming capacitors (Radio and CPU clock)
  • 32 kHz crystal oscillator for RTC (LSE)
  • Internal low-power 32 kHz (±5%) RC (LSI1)
  • Internal low-power 32 kHz (stability ±500 ppm) RC (LSI2)
  • Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25% accuracy)
  • High speed internal 16 MHz factory trimmed RC (±1%)
  • 2x PLL for system clock, USB, SAI, ADC
  • Memories Up to 1 MB flash memory with sector protection (PCROP) against R/W operations, enabling radio stack and application
  • Up to 256 KB SRAM, including 64 KB with hardware parity check
  • 20x 32-bit backup register
  • Boot loader supporting USART, SPI, I2C and USB interfaces
  • OTA (over the air) Bluetooth(R) Low Energy and 802.15.4 update
  • Quad SPI memory interface with XIP
  • 1 Kbyte (128 double words) OTP

Parametrics:

  • SRAM:256 Kbytes
  • Operating Voltage:1.71 – 3.6 V
Product Attribute Attribute Value
Manufacturer: STMicroelectronics
Product Category: Microcontrollers – MCU
Series: STM32WB55RG
Core: Arm Cortex
Flash Memory Size: –
Data RAM Size: 256 Kbytes
Max CPU Frequency: –
Operating Supply Voltage: 1.71 – 3.6 V
ADC Resolution: –
Number of I/Os: –
Operating Temperature: –
Brand: STMicroelectronics

In-Stock Part, Ready to Ship, Competitve Price, RFQ please contact: sales@icharbor.com